| Equipment | Forestry Skidder |
| Trailer | RGN (Removable Gooseneck) |
| Route | Mebane, NC → Excelsior Springs, MO |
| Distance | ~1,100 miles |
| Completed | April 2026 |
At 67 feet long and over 12 feet wide, this skidder presented a genuine super-wide challenge. The load required oversize permits across five states — North Carolina, Tennessee, Kentucky, and Missouri — each with varying escort vehicle requirements. Tennessee mandated both front and rear escorts during transit through mountain corridors.
Freedom Heavy Haul arranged the full escort package, obtained all state permits in advance, and kept the load moving on schedule. Despite the complexity of a five-state oversize corridor, the skidder was delivered to Excelsior Springs on time, and the client avoided any project downtime waiting on equipment.
A forestry skidder 67 feet long and 12 ft 3 in wide qualifies as a super-wide load and requires oversize permits in every state it crosses. Escort vehicles are typically required — some states mandate both front and rear escorts. Routing must often avoid secondary roads and stay on interstate corridors that can safely accommodate the width.
Requirements vary, but most states require at least one escort vehicle for loads wider than 12 feet. Tennessee requires both front and rear escorts for super-wide loads transiting mountain corridors like I-40 west. Your carrier should manage all escort coordination as part of the permit process.
A haul from Mebane, NC to Excelsior Springs, MO covers approximately 1,100 miles. With oversize permits and escort requirements across four to five states, transit typically takes 3-5 days depending on permitted travel hours and escort availability in each state.
Need to move similar equipment? Contact Freedom Heavy Haul for a free quote on your heavy equipment transport.